Video Storage Calculator: How Much Storage Do You Need per Hour of Footage?
13 min
red
One hour of 4K UHD Apple ProRes 422 HQ at 24p takes about 318 GB. Camera H.264 and H.265 files are smaller: a Sony FX5 shooting 4K H.264 or H.265 at 24 to 30 fps (High setting) uses 45 to 135 GB per hour. Raw depends on resolution and compression; 6K Blackmagic RAW 8:1 at 30 fps uses 436 GB. For any bitrate, GB per hour = Mbps x 3600 / 8 / 1000; multiply by the hours you record and the copies you keep for a project total.
Use the calculator above, or the tables below. Every rate is the codec or camera maker's own published figure, with the source linked under each table. We show only the resolutions and frame rates each vendor publishes, and we explain how to scale the rest near the end of the page.
How do you calculate video storage?
Cameras and codecs quote data rates in megabits per second (Mbps). Storage is sold in gigabytes (GB). To go from one to the other:
GB per hour = Mbps x 3600 / 8 / 1000
That is 3600 seconds in an hour, 8 bits in a byte, and 1000 MB in a decimal GB, which is how storage vendors count. Apple lists ProRes 422 HQ at UHD 24p as 707 Mbps, so 707 x 3600 / 8 / 1000 = 318.15 GB per hour. When a maker gives MB per second instead (Blackmagic and RED do), multiply by 3.6: 121 MB/s x 3.6 = 435.6 GB per hour.
Total storage = GB per hour x hours recorded x number of copies, plus proxies, exports, graphics and project files.
Apple ProRes storage per hour
Each cell shows GB per hour, with Apple's Mbps in parentheses. The 24p and 30p rows also apply at 23.976 and 29.97 fps, and ProRes 4444 figures are without alpha.
1080p (1920 x 1080)
Frame rate | 422 Proxy | 422 LT | 422 | 422 HQ | 4444 (no alpha) | 4444 XQ (no alpha) |
24p | 16 GB (36 Mbps) | 37 GB (82 Mbps) | 53 GB (117 Mbps) | 79 GB (176 Mbps) | 119 GB (264 Mbps) | 178 GB (396 Mbps) |
25p | 17 GB (38 Mbps) | 38 GB (85 Mbps) | 55 GB (122 Mbps) | 83 GB (184 Mbps) | 124 GB (275 Mbps) | 186 GB (413 Mbps) |
30p | 20 GB (45 Mbps) | 46 GB (102 Mbps) | 66 GB (147 Mbps) | 99 GB (220 Mbps) | 148 GB (330 Mbps) | 223 GB (495 Mbps) |
Source: Apple ProRes White Paper (April 2022), Target Data Rates appendix.
4K UHD (3840 x 2160)
Frame rate | 422 Proxy | 422 LT | 422 | 422 HQ | 4444 (no alpha) | 4444 XQ (no alpha) |
24p | 65 GB (145 Mbps) | 148 GB (328 Mbps) | 212 GB (471 Mbps) | 318 GB (707 Mbps) | 477 GB (1,061 Mbps) | 716 GB (1,591 Mbps) |
25p | 68 GB (151 Mbps) | 154 GB (342 Mbps) | 221 GB (492 Mbps) | 332 GB (737 Mbps) | 498 GB (1,106 Mbps) | 747 GB (1,659 Mbps) |
30p | 82 GB (182 Mbps) | 184 GB (410 Mbps) | 265 GB (589 Mbps) | 398 GB (884 Mbps) | 597 GB (1,326 Mbps) | 895 GB (1,989 Mbps) |
Source: Apple ProRes White Paper (April 2022).
6K (6144 x 3240)
Frame rate | 422 Proxy | 422 LT | 422 | 422 HQ | 4444 (no alpha) | 4444 XQ (no alpha) |
24p | 158 GB (350 Mbps) | 355 GB (788 Mbps) | 509 GB (1,131 Mbps) | 764 GB (1,697 Mbps) | 1,145 GB (2,545 Mbps) | 1,718 GB (3,818 Mbps) |
25p | 164 GB (365 Mbps) | 369 GB (821 Mbps) | 531 GB (1,180 Mbps) | 796 GB (1,769 Mbps) | 1,194 GB (2,654 Mbps) | 1,791 GB (3,981 Mbps) |
30p | 197 GB (437 Mbps) | 443 GB (985 Mbps) | 636 GB (1,414 Mbps) | 954 GB (2,121 Mbps) | 1,432 GB (3,182 Mbps) | 2,147 GB (4,772 Mbps) |
Source: Apple ProRes White Paper (April 2022).
8K (8192 x 4320)
Frame rate | 422 Proxy | 422 LT | 422 | 422 HQ | 4444 (no alpha) | 4444 XQ (no alpha) |
24p | 280 GB (622 Mbps) | 630 GB (1,400 Mbps) | 905 GB (2,011 Mbps) | 1,358 GB (3,017 Mbps) | 2,036 GB (4,525 Mbps) | 3,055 GB (6,788 Mbps) |
25p | 292 GB (649 Mbps) | 657 GB (1,460 Mbps) | 944 GB (2,097 Mbps) | 1,416 GB (3,146 Mbps) | 2,124 GB (4,719 Mbps) | 3,185 GB (7,078 Mbps) |
30p | 350 GB (778 Mbps) | 788 GB (1,750 Mbps) | 1,131 GB (2,514 Mbps) | 1,697 GB (3,771 Mbps) | 2,546 GB (5,657 Mbps) | 3,818 GB (8,485 Mbps) |
Source: Apple ProRes White Paper (April 2022).
Apple's table also covers SD, 720p, 2K, 4K DCI, 5K, 50p and 60p.
Avid DNxHR storage per hour
DNxHR HQ and HQX have the same rate. These are each level's full default bitrate; Avid now calls the family simply Avid DNx and allows lower custom bitrates.
DNxHR at 1080p (1920 x 1080)
Frame rate | 444 | HQ and HQX | SQ | LB |
23.976 fps | 157 GB (349.6 Mbps) | 78 GB (174.4 Mbps) | 52 GB (115.5 Mbps) | 16 GB (36.1 Mbps) |
25 fps | 164 GB (364.5 Mbps) | 82 GB (181.9 Mbps) | 54 GB (120.4 Mbps) | 17 GB (37.7 Mbps) |
29.97 fps | 197 GB (437.0 Mbps) | 98 GB (218.0 Mbps) | 65 GB (144.4 Mbps) | 20 GB (45.2 Mbps) |
Source: Avid, DNxHR Codec Bandwidth Specifications; Mbps calculated from Avid's bytes per frame.
DNxHR at 4K UHD (3840 x 2160)
Frame rate | 444 | HQ and HQX | SQ | LB |
23.976 fps | 629 GB (1,397.7 Mbps) | 314 GB (698.4 Mbps) | 208 GB (462.0 Mbps) | 65 GB (143.8 Mbps) |
25 fps | 656 GB (1,457.4 Mbps) | 328 GB (728.3 Mbps) | 217 GB (481.7 Mbps) | 67 GB (149.9 Mbps) |
29.97 fps | 786 GB (1,747.1 Mbps) | 393 GB (873.0 Mbps) | 260 GB (577.5 Mbps) | 81 GB (179.7 Mbps) |
Source: Avid, DNxHR Codec Bandwidth Specifications.
Avid also publishes 2K, 4K DCI, 50 fps and 59.94 fps rates, but its tables stop at 4K. For 6K and 8K, use the scaling rule at the end of this page.
Blackmagic RAW storage per hour
Blackmagic gives constant bitrate rates for the Pocket Cinema Camera 6K Pro at 30 frames per second, in MB/s. The table converts them (x 8 for Mbps, x 3.6 for GB per hour).
Resolution (30 fps) | 3:1 | 5:1 | 8:1 | 12:1 |
6144 x 3456 (6K) | 1,163 GB (2,584 Mbps; 323 MB/s) | 698 GB (1,552 Mbps; 194 MB/s) | 436 GB (968 Mbps; 121 MB/s) | 292 GB (648 Mbps; 81 MB/s) |
4096 x 2160 (4K DCI) | 490 GB (1,088 Mbps; 136 MB/s) | 295 GB (656 Mbps; 82 MB/s) | 184 GB (408 Mbps; 51 MB/s) | 126 GB (280 Mbps; 35 MB/s) |
Source: Blackmagic Design, Pocket Cinema Camera 6K Pro tech specs, Storage Rates.
Shooting 24 fps? Take 24/30 = 0.8 of the figure (an approximation). Blackmagic lists no Blackmagic RAW rate at UHD or 1080p for this camera.
H.264 and H.265 camera files
There is no single "H.264 rate." It changes with the camera and the setting. As an example, here are the High quality settings for the Sony FX5; other models differ.
Format | Frame size | Frame rate | Mbps | GB per hour |
XAVC S-I (H.264 all-intra) | 1920x1080 | 23.98 | 89 | 40.1 |
XAVC S-I (H.264 all-intra) | 1920x1080 | 25 | 93 | 41.9 |
XAVC S-I (H.264 all-intra) | 1920x1080 | 29.97 | 111 | 50.0 |
XAVC S-I (H.264 all-intra) | 3840x2160 | 23.98 | 240 | 108.0 |
XAVC S-I (H.264 all-intra) | 3840x2160 | 25 | 250 | 112.5 |
XAVC S-I (H.264 all-intra) | 3840x2160 | 29.97 | 300 | 135.0 |
XAVC S-L 4:2:0 (H.264 long GOP) | 1920x1080 | 23.98 | 50 | 22.5 |
XAVC S-L 4:2:0 (H.264 long GOP) | 1920x1080 | 25 | 50 | 22.5 |
XAVC S-L 4:2:0 (H.264 long GOP) | 1920x1080 | 29.97 | 50 | 22.5 |
XAVC S-L 4:2:0 (H.264 long GOP) | 3840x2160 | 23.98 | 100 | 45.0 |
XAVC S-L 4:2:0 (H.264 long GOP) | 3840x2160 | 25 | 100 | 45.0 |
XAVC S-L 4:2:0 (H.264 long GOP) | 3840x2160 | 29.97 | 100 | 45.0 |
XAVC HS-L 4:2:0 (H.265 long GOP) | 3840x2160 | 23.98 | 100 | 45.0 |
Source: Sony, ILME-FX5 Help Guide, High quality setting.
Sony also lists 4:2:2, 4096 x 2160, 50p to 120p, and lower Mid and Low settings. All-intra uses more storage than long GOP but is much lighter to edit, because every frame stands alone.
REDCODE RAW and ARRIRAW
REDCODE RAW. RED lists a rate in MB/s for each quality setting at 24 fps. These are the V-RAPTOR [X] 8K VV figures:
Format (24 fps) | HQ | MQ | LQ | ELQ |
8K 17:9 (8192 x 4320) | 1,530 GB (3,400 Mbps; 425 MB/s) | 1,073 GB (2,384 Mbps; 298 MB/s) | 670 GB (1,488 Mbps; 186 MB/s) | 360 GB (800 Mbps; 100 MB/s) |
6K 17:9 (6144 x 3240) | 860 GB (1,912 Mbps; 239 MB/s) | 605 GB (1,344 Mbps; 168 MB/s) | 378 GB (840 Mbps; 105 MB/s) | 234 GB (520 Mbps; 65 MB/s) |
Source: RED, [V-RAPTOR \[X\] 8K VV operation guide](https://docs.red.com/955-0225/955-0225_V1.7+Rev-B+RED+PS,+V-RAPTOR+%5BX%5D+8K+VV+Operation+Guide+HTML/Content/4_Menus/b_ProjSet/R3D_Quality.htm), R3D Quality page.
Other RED cameras differ slightly: the KOMODO-X guide lists the same 6K figures, while the older V-RAPTOR XL guide lists 8K 17:9 HQ at 446 MB/s. Check the guide for your camera.
ARRIRAW is uncompressed raw sensor data. ARRI gives two headline rates:
Format | Published rate | Mbps | GB per hour |
2.8K 16:9 ARRIRAW at 24 fps | 1.34 Gbit/s | 1,340 | 603 |
ALEXA 65 Open Gate ARRIRAW at 24 fps | 5.89 Gbit/s | 5,890 | 2,650.5 |
Source: ARRI, ARRIRAW FAQ.
The same FAQ lists ALEXA SXT Open Gate (3424 x 2202) at 996 GB per hour and ALEXA LF Open Gate (4448 x 3096) at 1.80 TB per hour, both approximate. Lossless HDE (High Density Encoding) cuts ARRIRAW to roughly 60% of its size. For exact figures by camera and mode, use ARRI's Formats and Data Rate Calculator.
How much storage does a shoot need?
Three examples. Swap in your own codec, hours and copies.
Example | Recording plan | GB per hour | Footage total | With 3 copies |
1-day shoot | 2 cameras x 4 hours, ProRes 422 HQ UHD 24p | 318.15 (707 Mbps) | 8 h x 318.15 = 2,545 GB (2.5 TB) | 7,636 GB (7.6 TB) |
10-day documentary | 1 camera x 3 hours x 10 days, Blackmagic RAW 6K 8:1 at 30 fps | 435.6 (121 MB/s) | 30 h x 435.6 = 13,068 GB (13.1 TB) | 39,204 GB (39.2 TB) |
3-month series | 60 shoot days x 2 cameras x 4 hours, ProRes 422 UHD 24p | 211.95 (471 Mbps) | 480 h x 211.95 = 101,736 GB (101.7 TB) | 305,208 GB (305.2 TB) |
Source: rates from the Apple ProRes White Paper and Blackmagic's Pocket Cinema Camera 6K Pro specs; totals are our arithmetic.
Copies, backups and proxies
Copies. A common practice is three copies of camera originals, one of them off-site. The last column multiplies by 3.
Proxies. ProRes 422 Proxy at 1080p 24p is 36 Mbps, or 16.2 GB per hour. For the 1-day example that adds about 130 GB, or 5% of the originals. Your proxy codec may differ.
Everything else. Exports, graphics, music, stock, render caches and project files add to the total. Measure their share on your last project and add it as an allowance.
How much bandwidth do you need to edit each codec?
Your connection should at least match the bitrate of what you play, with room for other traffic. With several streams at once, add them up:
Bandwidth needed (Mbps) = stream rate (Mbps) x number of simultaneous streams, plus headroom
A 4-camera multicam of UHD ProRes 422 HQ is 4 x 707 = 2,828 Mbps, far beyond a 1 Gbps connection.
Media | Published rate per stream |
ProRes 422 Proxy, 1080p 24p | 36 Mbps |
H.264 long GOP, 1080p (Sony FX5 setting) | 50 Mbps |
ProRes 422 LT, UHD 24p | 328 Mbps |
ProRes 422 HQ, UHD 24p | 707 Mbps |
DNxHR HQ, UHD 23.976 fps (calculated from bytes per frame) | 698.4 Mbps |
Blackmagic RAW 8:1, 4K DCI 30 fps | 408 Mbps |
Blackmagic RAW 8:1, 6K 30 fps | 968 Mbps |
REDCODE RAW MQ, 6K 17:9 24 fps (V-RAPTOR [X]) | 1,344 Mbps |
Blackmagic RAW 3:1, 6K 30 fps | 2,584 Mbps |
Source: the maker tables above (Apple, Avid, Blackmagic, RED, Sony).
A 1 Gbps link carries at most 125 MB per second before overhead. Drives are rated in MB per second, so convert before you compare.
For cloud editing, your internet speed is the limit. Shade (our product) gives 25+ Mbps as its guide for 1080p H.264 and about 1 Gbps or more for 4K ProRes, and suggests pinning files to local cache when bandwidth is low. For raw or several streams, edit with proxies or plan faster links. See our guides to remote video editing workflows and accessing a NAS remotely for video editing.
What these totals mean on Shade
Shade is an intelligent cloud NAS for video teams. Drives mount like a local disk and stream from the cloud, so editors do not download full files first.
Growth: $29.75 per seat per month billed annually ($35 month to month), with 500 GB of active storage per seat, pooled across the workspace, and up to 15 seats.
Enterprise: custom pricing and 1 TB of active storage per seat. Enterprise only: bring your own storage (Amazon S3, Google Cloud Storage, Backblaze or Wasabi).
Add-on storage: priced on request; ask Shade for a quote.
Proxies: Shade automatically generates 1080p proxies for all video formats at no extra charge.
Set against the examples: the 1-day shoot (2,545 GB of originals) is just over the 2,500 GB pool that 5 Growth seats include. The 10-day documentary (13.1 TB) is more than the 7.5 TB a full 15-seat Growth plan lists, and the 3-month series (101.7 TB) far more, so projects like those need add-on storage or Enterprise. Bring your total when you ask Shade for a quote; see Shade pricing.
For finished footage, Shade Vault (archive) drives keep past projects searchable; ask Shade for archive storage pricing.
Streaming cannot beat your connection. If editors must play several full-resolution raw streams at once over a link slower than their combined rate, Shade is the wrong fit for that work unless they cut from proxies or pin files to local disk ahead of time. To compare options, see the best cloud storage for video production, the best cloud NAS for video editing teams and media asset management pricing.
How we got these numbers
A few sources needed extra care.
Apple ProRes. Apple's 24p and 30p rows are its 23.976 and 29.97 fps rates; its charts give the same figures at those frame rates. Apple also prints its own GB per hour column, which can differ from ours by 1 GB because of rounding (for UHD 422 HQ at 24p, Apple shows 318 and the formula gives 318.15).
Avid DNxHR. Avid's rate per stream is labeled "MB/s" but is in binary megabytes. Avid's DNx naming and data rates page labels the same figures MiB/s (1,048,576 bytes each), so reading them as decimal MB understates the rate by about 5%. We worked from bytes per frame instead: Mbps = bytes per frame x fps x 8 / 1,000,000. UHD HQ, for example, is 3,641,344 bytes per frame, or 698.4 Mbps at 23.976 fps (Avid's 83.26 MiB/s).
Blackmagic RAW. The table uses the constant bitrate settings. Blackmagic lists its constant quality settings (Q0 to Q5) only as ranges it calls indicative.
Sony. Sony's support pages describe XAVC S and XAVC S-I as H.264 formats and XAVC HS as H.265 (HEVC), which is how the table labels them.
ARRIRAW. ARRI's FAQ gives no frame rate for the SXT and LF figures (by our arithmetic, about 24 fps), and another paragraph gives 972.5 GB per hour for Open Gate 3.4K, so we call both approximate.
Scaling a rate the vendor did not publish. As a rule of thumb, data rate scales with frame rate and with pixel count. 6K at 6144 x 3240 has 2.4 times the pixels of UHD, and Apple's ProRes 422 HQ goes from 707 Mbps at UHD 24p to 1,697 Mbps at 6K 24p, a ratio of 2.40. So a 6K estimate for Avid DNxHR HQ at 23.976 fps is 698.4 x 2.4 = 1,676 Mbps, our estimate rather than an Avid figure. Image detail and noise also move the rate, which is why vendors call these target or indicative rates.
FAQ
How much storage do I need for 1 hour of 4K video?
It depends on the codec. At 24p, an hour of UHD is 318 GB in Apple ProRes 422 HQ, 148 GB in ProRes 422 LT, 314 GB in Avid DNxHR HQ and 45 GB in Sony FX5 4K H.264 long GOP.
How do I convert Mbps to GB per hour?
Multiply by 0.45, which is 3600 / 8 / 1000 in one step: 707 Mbps x 0.45 = 318.15 GB per hour. Divide by 1000 again for TB.
Is 1 TB enough for a 4K shoot?
For ProRes, only a short one: 1 TB holds just over 3 hours of UHD ProRes 422 HQ at 24p (318 GB per hour). The same terabyte holds about 22 hours of Sony FX5 4K H.264 long GOP (45 GB per hour). With 3 copies, divide those hours by 3.
Is ProRes or H.264 smaller?
Long GOP H.264 and H.265 camera files are much smaller: Sony FX5 4K long GOP records at 100 Mbps (45 GB per hour), against 707 Mbps (318 GB per hour) for ProRes 422 HQ UHD at 24p. Many teams accept the extra storage because ProRes is not long GOP, so it is easier to edit.
How fast does my internet need to be to edit 4K video from the cloud?
Fast enough to carry every stream you play at once, plus headroom. Shade's guidance is about 1 Gbps or more for 4K ProRes and 25+ Mbps for 1080p H.264. Proxies bring the requirement down.
Why are my files bigger or smaller than the table?
ProRes is a variable bit rate codec: Apple says simple frames use fewer bits, real rates usually stay close to the target in the table, and a frame never goes more than about 10% over it. Your software may also count in binary units (1 GiB is 1,073,741,824 bytes), which makes the same file look about 7% smaller than its size in decimal GB.