What internet speed do you need to edit video from the cloud?

18 min

red

Most advice on this topic gives you one number and moves on. The real answer depends on what you are editing, how many people share the connection, and whether you are playing media or moving it. A freelancer cutting H.264 interviews and a four-person team scrubbing ProRes 4K are asking very different things of the same cable modem.

This guide gives you the numbers, shows where they come from, and explains what to do when your connection falls short. Where a figure is our own arithmetic rather than a published spec, it is labeled as an estimate.

Download for playback, upload for ingest

Two directions of traffic matter, and they fail in different ways.

Download speed decides whether playback works. When you edit from a cloud drive that streams, your computer pulls the part of the file under the playhead as you watch. If the media’s bitrate is higher than your sustained download speed, you get buffering, stalls or dropped frames. Shade’s Academy puts it simply: your internet speed should be equal to or greater than the bitrate of the media you are playing.

Upload speed decides how fast footage gets in. Playback never needs much upload. Getting a card dump or a day of rushes into the cloud does. Many home and small-office plans give you a fraction of their download speed for upload, so this is where people are surprised. A plan sold as 1 Gbps down may come with a much smaller upload speed, and at 100 Mbps up a terabyte takes more than a day. The upload math is below.

One more split worth keeping in mind: playback is a steady demand for a long time, while uploads are one big job you can run overnight. Plan for the steady one first.

How much bandwidth each format needs

Bitrate is the amount of data per second a file needs to play. For ProRes, Apple publishes target data rates in its ProRes white paper, so those numbers are reliable. The table below converts them into the download speed needed for one stream of playback (Apple’s figures are in megabits per second; ProRes 4444 is the version without alpha).

Format (Apple ProRes)

1080p, 24 fps

UHD 4K, 24 fps

UHD 4K, 30 fps

ProRes 422 Proxy

36 Mbps

145 Mbps

182 Mbps

ProRes 422 LT

82 Mbps

328 Mbps

410 Mbps

ProRes 422

117 Mbps

471 Mbps

589 Mbps

ProRes 422 HQ

176 Mbps

707 Mbps

884 Mbps

ProRes 4444

264 Mbps

1,061 Mbps

1,326 Mbps

Source: Apple ProRes White Paper, target data rates. These are target rates; actual files vary with the picture content.

Compressed delivery-style codecs are far lighter. Shade’s Academy lists typical ranges of 8 to 15 Mbps for 1080p H.264 and 35 to 100 Mbps for 4K H.264, and recommends 25+ Mbps for 1080p H.264.

Camera originals can be heavier than either. The same Academy page lists these ranges at each camera’s maximum settings (lower frame rates and Long GOP modes use far less):

  • Sony FX3, FX6 and FX9, 4K XAVC-I: about 300 to 600 Mbps

  • Blackmagic Pocket 4K, 6K and 6K Pro, BRAW: about 500 to 2,700 Mbps

  • Fujifilm X-H2S and X-T5, 4K H.265: about 200 to 400 Mbps

  • Canon EOS R5 and C70, 8K RAW: about 2,600 to 5,400 Mbps

If you want the data rate for your exact camera and settings, the camera pages under /storage list data rates and storage per hour for specific models, such as the Sony FX3 and ARRI Alexa 35.

Turning a bitrate into a connection speed

A connection rated at 500 Mbps will not deliver 500 Mbps to one editor all day. Wi-Fi overhead, other people on the line and the distance to the storage region all take a cut. Shade’s Academy sets the minimum at the media’s bitrate and tells you to account for other activity on the line. Our rule of thumb, an estimate rather than a published figure, is to want about 1.5 times the bitrate of what you play, and to add the streams together if you run multicam or stacked layers.

Run that against the table: 4K ProRes 422 HQ at 24 fps is about 707 Mbps, and 1.5 times that is about 1,060 Mbps. That is why Shade’s “about 1 Gbps or more” for 4K ProRes is best read as a floor, not a comfortable target. Shade also recommends at least 500 Mbps down for general 4K work, which covers lighter 4K codecs and mixed timelines.

Proxies are how you work on a slower connection

If the table made your connection look inadequate, that is normal. Plenty of people edit 4K projects over a 100 Mbps line. They just do not play the 4K originals.

A proxy is a small, light copy of each clip, usually a lower resolution in an edit-friendly codec. You cut with the proxies, then switch back to the originals for color and export. The ProRes 422 Proxy row in the table is the idea in numbers: 36 Mbps for 1080p, 145 Mbps for UHD, a fraction of what the full-quality version needs.

Shade’s guidance for limited bandwidth is to work with proxy files or sub-4K content. The Academy troubleshooting guide says proxy workflows significantly improve performance on connections under 500 Mbps. Shade also runs every uploaded file through its own proxy generation automatically. For the edit itself, use your editing software’s proxy workflow: Premiere Pro, DaVinci Resolve and Final Cut Pro all have one. One tip from the same Academy page: if you play back at half quality in Premiere Pro, you roughly halve the bitrate you need.

Proxies also matter outside the edit. Review and client playback rarely need original-quality media either.

Latency, Wi-Fi and wired connections

Bandwidth is only part of it. Playback from the cloud also depends on latency (how long a request takes to come back) and jitter (how much that time varies). Shade’s Academy notes that the farther you are from the region your storage lives in, the slower playback can be. If your team is in London and the data sits in a US region, that distance is a cost you cannot buy back with a faster plan, so choose the storage region near the people who edit.

Wired beats Wi-Fi for editing. Wi-Fi speeds swing with walls, neighbors and other devices, and the swings show up as stutter. Shade’s troubleshooting guide says to switch from Wi-Fi to Ethernet when editing non-proxied assets and to check that you have no packet loss or intermittent drops. A quick speed test is useful, but a test that shows 600 Mbps at a quiet moment tells you little about how the line behaves while three people are working.

Several editors, one office line

Bandwidth adds up. Some examples, using the numbers above (estimates for a worst case where everyone plays media at once):

  • Ten editors on H.264 4K at about 100 Mbps each: about 1 Gbps.

  • Four editors on UHD ProRes 422 at 24 fps (471 Mbps each): about 1.9 Gbps, more than a 1 Gbps line can carry.

  • Ten editors on 1080p ProRes Proxy at 24 fps (36 Mbps each): about 360 Mbps.

The last line is why proxies are the practical answer for crowded offices.

There is a second lever for teams in one building. Shade has a Shared Cache option: an on-prem server that, after one person pulls a file from the cloud, serves it to the next teammate over the local network at LAN speed. The second access does not use cloud bandwidth, and permission checks still apply. Shade’s Academy says you get the Shared Cache program by asking Shade for it. It helps most when several editors open the same footage, and less when everyone works on different files.

Upload time for a day of footage

Here is the upload math. It assumes you actually get about 80 percent of the rated upload speed once overhead is counted, which is an estimate and may be generous on a busy line.

Formula: hours = size in gigabytes times 8,000, divided by (upload speed in Mbps times 0.8), divided by 3,600.

Footage size

100 Mbps up

500 Mbps up

1 Gbps up

250 GB

about 6.9 hours

about 1.4 hours

about 42 minutes

1 TB

about 27.8 hours

about 5.6 hours

about 2.8 hours

3 TB

about 83 hours

about 16.7 hours

about 8.3 hours

To judge which row is yours, look at storage per hour. Apple’s white paper lists ProRes 422 HQ at UHD 24 fps at about 318 GB per hour, so three hours of rolling camera is roughly 950 GB, close to the 1 TB row. A four-hour day of 1080p H.264 at 15 Mbps is only about 27 GB (about 6.75 GB per hour, our arithmetic), which uploads in minutes. The video storage calculator does the storage-per-hour step for your own camera and codec.

Two practical points. First, uploading while you edit competes with playback for the same connection, so schedule big ingests for lunch or overnight. Second, for very large uploads, over 1,000 assets or 100 GB, Shade recommends using the web app or desktop app rather than copying through the mounted drive, because the app upload path is tuned for large files.

Where Shade’s guidance fits

Shade’s published guidance, from its Academy, is:

  • 1080p H.264: 25+ Mbps.

  • 1080p ProRes: 100+ Mbps.

  • 4K H.264: typical bitrates of 35 to 100 Mbps (the Academy table gives the bitrate but no separate speed).

  • 4K ProRes: about 1 Gbps or more.

  • 8K H.264: 200+ Mbps; 8K ProRes: 5 Gbps or more.

  • For general 4K work, at least 500 Mbps down.

Beyond bandwidth, Shade’s mounted drive keeps a local cache (26 GB by default, adjustable) so repeat access does not come back over the wire, and you can pin files to the cache to have full local copies for offline or low-bandwidth work. Pinned files are not subject to the cache size limit, so keep an eye on free disk space.

Shade will not fix a connection that cannot carry your codec. On a weak line, any streaming drive depends on proxies and pinning. If you only need to move files and not play them live, a sync tool or an overnight upload may be all you need. For the broader workflow around remote teams, see the remote video editing workflow guide, and for prices and plans see pricing.

A quick way to test your own setup

  1. Run a speed test on a wired connection, at the same time of day your team normally works. Note download and upload separately.

  2. Find the data rate of your most demanding format using the table above or the camera data rate pages.

  3. Multiply by 1.5 (our rule of thumb for headroom), and by the number of streams you play at once.

  4. If the result is higher than your download speed, make proxies or drop to lower resolution for the edit.

  5. If your upload math in the table above says ingest takes longer than your shoot-to-edit window, plan for overnight uploads or a faster upload tier.

Paying for storage, review and sharing separately?

Shade does all three from $29.75 per seat a month (billed annually), with 500 GB of storage per seat.